Veko VEDVR 2108 Betriebsanleitung PDF herunterladen (Seite 70)

EcoSense

Network

This menu allows additional network settings to be congured if required. If utilising the 1Gb network

connection, enter address details via Network Settings:Gb Network.

Server Name This eld can be edited to allocate a name to the unit. This would

be used if accessing the unit via a Domain Name Server (DNS).

IP Address This is the IP address allocated to the unit.

Sub Net This is the subnet of the network were the unit is located.

Gateway This is the IP address of the default gateway (router).

Primary DNS This is the primary DNS server IP address for applications utilising

domain names.

Max Transmission Rate Shows the maximum transmission speed for the network type.

Force 10BaseT operation The unit supports 10 or 100BaseT half duplex transmission.

Selecting this option will force the unit to operate at a 10BaseT

connection.

Tx Image Buffers This is used in order to improve the picture delivery over Ethernet

when using a slow connection i.e. 256Kbps. A buffer setting of 1,2

or 3 is available.

Ethernet MTU This is the maximum transmit unit for the Ethernet packet. The

MTU is the largest physical packet size measured in bytes that the

network can transmit. By default this gure is set to 1500bytes.

Mx Transmission Timeout ms This is the time (in milliseconds) the unit will wait to re-send a

packet if an acknowledgement is not received.

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 119 120

Keine Kommentare

Veko VEDVR 2108 Betriebsanleitung Seite 70